Programming guide for high-speed pulse output PLC LSIS XGB series

Introduce high-speed pulse output PLC LSIS XGB

XGB is a micro PLC that offers maximum performance at minimum cost. With its high functionality, XGB supports simple control systems to complex tasks. Strengthening its communication functions, XGB offers user-oriented integrated control. Based on its strengths, XGB can be used in many application fields.

Devices

In this article, I use PLC XBG XBC-DN30S

Pulse Generation(built-in position)

Pinouts and connections

XBC-DN30S

• Pulse output: P00040 X axis, P00040 Y axis
• Direction output: P00042 X axis, P00041 Y axis

Pinouts INPUT.

Pulse Programing

Device Configuration

You configure the correct device plc you are using.

Next, go to the Internal Parameter – Positioning section and configure the pulse generator to match the servo you are using

Pulse Programing

Network 1: The run forward Jog when M0000 ON

Network 2: The run reverse Jog run when M0002 ON

Network 3: Set home location when M00003 is ON

Network 4: The pulse D00000 and speed D00010 M0004 ON

Network 5: Reset M00004 when the pulse is completed

Network 6: The actual pulse data transfer to D00002

Testing

When Set D00000 = 50000, D00010 = 5000. Then FLC will output 50000 pulses at speed=5000 as shown below.

Through the above example, I guide you to program high-speed pulse output PLC LSIS XGB series, a line that supports very convenient and cheap pulse generator. What is wrong with the article, I hope to hear from you, thank you

Wincc to excel Eplan PLC Delta Python

Reference source:

https://www.ls-electric.com/products/category/Smart_Automation_Solution/PLC/XGB_Series