Guide Position control by pulse and direction signal (MINAS A5/A5E/A6SG/A6SF)
This article is intended to help you set up the MINAS servo drive system. It is based on information from...
How To Make PANASONIC A4 SERVO Cable To PC
Introduce
To connect a Panasonic A4 servo to a PC, you will need to use a suitable control interface such as USB, RS232 or Ethernet network (if the servo supports it). As for genuine RS232, USB or Ethernet cables, many people may not be qualified to buy a genuine cable, but still want to be able to connect and read and write normally.
In this article, I will show everyone how to solder the cable connecting the Panasonic A4 to the PC COM port to connect the Panasonic PANATERM V6 software.
How to make Panasonic A4 Servo cable with PC
1.You prepare COM port, standard MD8 port as below:
2.How to solder pins between two device ports:
- MD8: pinout-3<———————————— >DP9: pinout-2
- MD8: pinout-4<———————————— >DP9: pinout-5
- MD8: pinout-5<———————————— >DP9: pinout-3
So here is a way to make a Panasonic A4 Servo cable with a PC that you can do to reduce costs and be able to connect to the computer.
See more youtube : Link
Related Posts
