Cách làm cáp Servo Panasonic A4 với PC


Introduce To connect a Panasonic A4 servo to a PC, you will need to use a suitable control interface such as USB, RS232 or Ethernet network (if the servo supports it). As for genuine RS232, USB or Ethernet cables, many people may not be qualified to buy a genuine cable, but still want to be able to connect and read and write normally. In this article, I will show everyone how to solder the cable connecting the Panasonic A4 to the PC COM port to connect the Panasonic PANATERM V6 software. How to make Panasonic A4 Servo cable with PC...

Hướng dẫn Điều khiển vị trí bằng xung và tín hiệu hướng (MINAS A5/A5E/A6SG/A6SF)

Guide Position control by pulse and direction signal (MINAS A5/A5E/A6SG/A6SF)

This article is intended to help you set up the MINAS servo drive system. It is based on information from the MINAS series manual and our practical experience. The step-by-step guide will teach you how to connect the PLC to the MINAS servo driver and set up the most important parameters. Functional overview Position control is a control mode in which the motor moves the load to a position-defined target. The servo driver can be controlled by a pulse train in the frequency range 1Hz to 8MHz from a host controller such as a PLC or CNC controller, or by...

Welcome Back!

Login to your account below

Create New Account!

Fill the forms below to register

Retrieve your password

Please enter your username or email address to reset your password.